Toilet overflowing: stop the water in under a minute
Do not flush again. Remove the tank lid and push the flapper down to stop the refill, or turn the oval handle on the wall behind the toilet clockwise until it stops. Mop up water at once, because bathroom floors and the ceiling below can absorb a lot.
If the toilet is overflowing and other drains are slow, the problem is not the toilet alone. A blocked branch or main line is the likely cause, which the sewer line cleaning page covers.
Common toilet problems and what fixes them
| Symptom | Likely cause | Repair |
|---|---|---|
| Runs on or hisses | Worn flapper or fill valve | Replace the flapper or fill valve |
| Weak flush | Clogged rim jets or partial clog | Clear the jets, snake the trap |
| Water at the base | Failed wax ring or loose bolts | Reset the toilet with a new wax ring |
| Rocks on the floor | Loose flange or bolts | Re-secure and replace the flange if needed |
| Sweating tank | Humidity and cold water | Insulated liner or mixing valve |
A running toilet can waste a surprising amount of water without any visible leak. Add a few drops of food coloring to the tank, wait fifteen minutes, and look at the bowl. Color in the bowl means the flapper is leaking.
Toilet leaking or overflowing? Call the 24/7 line.
Call (314) 461-6239Hard water and toilet parts
Missouri American Water reports total hardness of 66 to 226 ppm as calcium carbonate in its 2023 St. Louis County report. Mineral deposits clog the small rim jets under the bowl lip and make flappers stiff and leaky. Cleaning the jets with a descaler restores a weak flush, and a water softener slows the buildup.
Older toilets, especially those from before the 1990s, may use more water per flush. Replacing one is a decision for later. First we tell you whether a repair costs less than a new toilet.
When to call a plumber: signs the problem is deeper than the toilet
Signs the problem is deeper than the toilet
- Gurgling in the tub or sink when the toilet flushes
- Water rising in a basement floor drain after a flush
- Several toilets slow at once
- Sewage odor with no visible cause
- A toilet that clogs again within a day of clearing
Any of these signals a line problem. Call the dispatcher and mention it, so the plumber brings the cable or camera.
What changes the price of a toilet repair
Cost factors we explain before work starts
- The partA flapper or fill valve is a small repair. A new flange or wax ring reset takes more time.
- Clog depthA bowl clog differs from one deep in the trap or the branch line.
- Toilet ageOld or discontinued toilets may not have parts available.
- Water damageA leak that reached the subfloor may need other trades.
- Time of dayAfter-hours calls are priced differently from scheduled visits.
Sudden overflow damage is often covered by homeowner insurance, so keep photos and the invoice. Call (314) 461-6239 for your actual number.
Standards note: Toilets are covered by the International Plumbing Code (IPC), which also sets the flush volume allowed for new fixtures. The City of Ballwin lists the International Plumbing Code among its adopted codes, and the Building Inspections Department at (636) 227-2129 can confirm which edition applies.
Toilet repair questions from Ballwin homeowners
Yes. Call (314) 461-6239 any hour. A licensed plumber is dispatched for overflows and leaks, with same-day appointments offered when a crew is free.
The flapper is usually worn or the fill valve is out of adjustment. Both are quick repairs.
Yes. It usually needs the bolts tightened or the toilet reset with a new wax ring.
If only one toilet is affected, it is likely a clog in that toilet. If other fixtures are slow too, the line may be blocked.
We give both prices when a repair is borderline. Many toilets are worth repairing.
Close the main water shutoff and call. We can replace a failed wall valve.
Toilet overflowing or leaking? Call the 24/7 line for a licensed plumber.
Call (314) 461-6239